The patterned cement tile look is still going strong, but not everyone can go ripping out their tile to get the look. Because of that, I figured out how to stencil fireplace tile to give my hearth a new look at a fraction of the price! And, this process also works to stencil fireplace tile surrounds.
Let me show you how I gave my plain Jane fireplace tile a faux cement tile look at a fraction of the price!
The Fireplace Tile Before Stenciling
Here’s the BEFORE photo – as you can see, the tile was a solid color. Nothing too exciting at all. It’s original to the house (built in 1927), and was super dingy with random black marks all over it. (And just so you all know and don’t leave me a comment that I could burn my house down by painting the hearth tile since it’s flush with the fire box, the fireplace doesn’t work.)
Check out this post to see how I painted the marble fireplace hearth in my new home!
Supplies Needed to Stencil Fireplace Tile
Thank you to Royal Design Studio for sponsoring this post. The project and opinions are all my own. Also, this post contains affiliate links for your convenience; please click here to see my full disclosure policy.
Here are the supplies I used for this stenciled fireplace makeover:
- TSP (Trisodium Phosphate)
- Rubber gloves
- Sponge
- Painters tape
- Royal Design Studio Mediterranean Tile Stencil Set
- Spray adhesive
- Chalk paint
- Small foam roller
- Polycrylic
How to Stencil Fireplace Tile Hearths and Surrounds
The hardest part about stenciling tile is having patience! It’s important to do the right prep work and allow each tile to dry before moving on to another, or you might smear the paint! You’ll see what I mean later on.
Step One: Clean the Fireplace Tile
I started by giving my tile a hardcore cleaning with TSP (Trisodium Phosphate), which is a special cleaning agent that you should use before painting things that are really dirty, like a dingy fireplace hearth that was covered in old ash and grime. When cleaning with TSP, you definitely want to wear rubber gloves.
After I scrubbed and scrubbed, a lot of the disgustingness came off (thank goodness), and I was embarrassed that I hadn’t cleaned that tile sooner. Shame.
I let the tile sit overnight to dry, just to make sure it was SUPER DUPER dry.
Step Two: Tape Off a Tile
Then the next day, I got down to business. I started by using this painter’s tape to tape off the grout of one tile.
Step Three: Stencil the Fireplace Tile
Next, I studied the contents of my Mediterranean Tile Set from Royal Design Studio and decided which of the four patterns included in the set I wanted to use on my fireplace hearth. While I loved all of the options included (and could have used all of them in this project), I ultimately settled on the one I did because it goes best with my home’s style and era!
Once the decision was made, I gave the back of the stencil a light spray of this spray adhesive.
I pressed the stencil into place on the tile and made sure that all of the edges were firmly on the tile.
Then I mixed up a batch of these ivory and white chalky finish paints (only because I didn’t have enough of one color), and applied a light coat over the stencil with a tiny foam roller.
Once that first coat of paint dried, I applied another light coat. Before the second coat was completely dry, I removed the stencil from the tile. (In my experience, it’s easier to remove the stencil before the paint is totally dry because it comes off cleaner and there’s less of a chance of removing paint than when the paint is dry.)
Step Four: Repeat the Process
I repeated the taping, spray adhesive application, and rolling process across all of the tiles. I had to work on the tiles in a random order because I had to be careful about placing tape on or too close to fresh paint.
I made sure to stencil all of the regularly shaped tiles first, and then I moved on to the trickier ones in the corners. For some of them I simply had to bend my stencil and press it into place where it wouldn’t lie flat.
On the parts of the design that I couldn’t use my foam roller, I drew in the design with a pencil on the tile and free painted those spots with a small artist’s brush.
And then, for the really tricky tiles that were not square or rectangular, I cut the stencil to fit.
When I needed the stencil that had been cut for another tricky tile, I just pressed the pieces back together and onto the tile. It worked like a charm, but I am so glad I saved the cutting until it was absolutely necessary.
Step Five: Seal the Stenciled Tiles
I let the painted fireplace tiles sit overnight to fully dry, and then I applied three coats of matte finish polycrylic over them to ensure that they will be durable and properly sealed.
The Completed Stenciled Fireplace Makeover
And then my fireplace tile looked so refreshed!
I am absolutely in love with the finished product, and could not be happier that I have the trendy cement tile look in my home as a result of stenciling my fireplace tile.
I think this stenciled tile fireplace makeover was a huge success! Although I loved the look of my fireplace before, I am even more in love with it now. The subtle character the stenciled tile adds brings it up a notch, in my opinion.
If you want to get the cement tile look for less or want to add some pattern to plain or ugly fireplace tile, I definitely recommend checking out Royal Design Studio’s tile stencil kits and giving your tile a makeover, too!
And if you enjoyed this post and think you might give stenciled tile a try in your home, please make sure to pin this post for later!
-Bre
Holly Hanks says
Beautiful!!! I also love the box with plant inside your fireplace. It is exactly what I have been looking for. Where did you find it?
Bre says
Hi, Holly – thank you! I got the plant at Lowe’s and it is called a Chinese Evergreen. It’s very hearty! I haven’t killed it yet! π
Kathryn says
Just lovely! What size are your tiles? I would like to try this but my tiles are 4 inch x 4 inch. I suspect it may not work.
Bre says
Hi, Kathryn! Thank you! My tiles are 6″ x 6″, so the stencil I chose worked perfectly. I’m not sure if Royal Design Studio has 4″ x 4″ tiles, but it’s worth checking! If they don’t have them, I am sure other stencil companies do, and I have seen places that you can have a stencil cut to custom size (and it’s not expensive)! I hope you find the perfect pattern and size for your project!
Roxanne says
I love this! I think this just inspired my next project!
Bre says
Yay! Thanks for stopping by, Roxanne! π
Susan Rawlings says
Wow this turned out great. Half way through I wasn’t convinced but you sold me!
Bre says
Thanks, Susan! π
Erica @ Dwell Beautiful says
This project turned out so well! It looks like the tiles were made this way. A great way to class up your fireplace with out having to tear everything out π
Bre says
Thanks, Erica!! Yeah – eventually when we rebuild the firebox it will probably have to come out. But until that time, it is a great little facelift!
Michelle James says
This is just beautiful! Definitely adds character! Love it!
Bre says
Thank you so much, Michelle! π
Kendra @ www.joyinourhome.com says
Wow! It looks beautiful, Bre! Makes your fireplace that much prettier! xo
Bre says
Thank you, Kendra! π
Leigh Anne says
Such a good idea to use this stencil on fireplace tiles! It turned out great!!
Bre says
Thanks, Leigh Anne! π
Amy | Canary Street Crafts says
It’s amazing what a big difference that little bit of stenciling made! It looks so pretty, Bre!
Bre says
Thank you, Amy! Yeah – we are loving it!!
Emily @ Table & Hearth says
Those tiles look even more original to the home now! Such a great idea and it’s beautiful!
Kristi says
This is SO pretty Bre!!! LOVE the vintage feel!
Bre says
Thank you, Kristi!
Breanna says
Bre this seriously turned out so good!! I love it!!
Bre says
Thanks, Bre! I am glad it turned out so well, too!
Kristen says
Great idea! It looks fantastic!
Bre says
Thank you, Kristen!
Erin says
It’s amazing what a little paint and pattern can do… I honestly never would have considered stenciling tiles like this. Well done!
Bre says
Thanks, Erin! Not sure I’m brave enough to attempt it on a floor that gets heavy use, but I think it will be great in this spot!
Katie @ Little House of Four says
Wow, I can’t believe the difference! It’s looks completely different and updated. Great job!
Bre says
Thank you Katie!